Master Tool Box How to Use USB for MTK Flashing Solution

Here is a little Tutorial that how you can use USB cable for any MTK Phone.

or if you fail to find Rx, Tx, no need Worry, if phone connector not have Rx, Tx, just get USB cable that Come With Phone.

Thats it

Mostly 6252 have Motorola connector and Mini USB

So you can Use any USB for it

ATF Box N9 Flashing v8.00 SOLUTION

Advance Turbo Flasher v8.00

Release Date: November 25, 2011


HARMATTAN (MEEGO) Flashing Engine Fully Supported
--> FULL Flash N9-00, N950 and other upcoming MEEGO Devices
--> Flash EMMC (Mass Memory)
--> Secure User Data Erase (Removes Phone User Lock and Security Settings)
--> Supports Cold Flashing via "Skip ADL Chk" (Use only for non-booting Devices)

Known Limitations about MEEGO HARMATTAN Phones (N9-00 and N950)
--> Entire PM area is Write Protected... You can Read, but you cannot Write back anything
--> Security Code which is Read by ATF Software (PM 308,5) is NOT the same as the PHONE LOCK Code
--> When Phone goes to TEST MODE after flashing, it is Normal for ATF to get an ERROR while
reading IMEI and Simlocks on the First Read Attempt.
--> It is not Possible to Downgrade the Firmwares on these phones. So make sure that
your required Language Pack Exist on the Highest Firmware Version before
attempting to Upgrage your phone.

 

Bug Fixes:

1. FORCE Broadcom into TEST MODE is NO LONGER NEEDED!
--> NORMAL MODE Decrypt PM 120 NOW FIXED
--> NORMAL MODE Scan Phone Hang NOW FIXED
2. Automatically Selects "Backup RPL" before Phone is Authorized via USB Connection
3. Time and Date Format for saving PM and RPL files FIXED
4. ATF Support Site Login and ATF Network Login Delays FIXED
5. Improved BB5 ENO Flashing for USB ADL (Rapido Phones)
6. Re-Enabled SL3 to SL2 Downgrade Unlock for OLD HASH RAPIDO Phones

Please Read Carefully the Release.txt so you will have some Basic Idea on how
to deal with MEEGO HARMATTAN Phones (N9-00, N950)...

DO NOT FLASH PHONES Marked with "PROTOYPE"... You will kill it!



================================================== ====
================================================== ====
BB5 MEEGO / HARMATTAN FLASHER
================================================== ====
================================================== ====

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ==== 

MXKEY/MXBOX v3.5 revision 1.6 LETEST VERSION FREE DOWNLOAD

MXKEY/MXBOX v3.5 revision 1.6, Public-Release
MEGA UPDATE - OLD VERSIONS ARE OBSOLETE


What is new added, changes and improvements:

MAIN

Introduced HTI Firmware version 00.49
New in firmware 00.49:
- added: boot mode switch function
- improved: serial and flash bus communication routine
- added: dct4 product data calc algorithm
- added: broadcom sec.repair algorithm
please Update HTI by using "Update HTI" button !

- uistyle updated
- HTI identity now displayed on Dongle Maintenance
- HTI serial displayed on connection tab
- added: support for HTI PLUS (MXBOX ORANGE) interface



Nokia Tool

- bugfixed: NCK send for PA_SIMLOC30 (error 0x1)
- added: HTI Standalone function for DCT4 PRODUCT/BT/WLAN DATA fix.
(required HTI FW version 00.49 or later)
- added: BB5 security repair function by USB for RAP3Gv4, RAPUv2, BROADCOM(BCM21351)
- added: BB5 security repair function by HTI for RAPUv2
- improved: BB5 security repair function on all supported ASIC

Note for BB5 security repair function:
Works standalone with HTI connected
Required HTI FW version 00.49 or later
This function includes:
- FULL RPL BACKUP
- SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SIMLOCK REPAIR (PA_SL/PA_SL2)
- NCK CALC (PA_SL/PA_SL2)
- SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
- SL3 NCK CALC (PA_SL3/PA_SIMLOC30, 15 digit NCK)

Phones supported by HTI:
- Any RAPUv1, RAPUv2, RAP3Gv3, RAP3Gv4 and RAPIDO phones.

Phones supported by USB:
- Any RAPUv1, RAPUv2, RAP3Gv4, RAPIDO and BROADCOM(BCM21351) phones.

Supported ROOT KEY HASH:
ALL HASH supported !


sl3bf(Local SL3 Bruteforce) module changes
- added: support for oclHashcat-lite-0.08

sl3u(SL3 Logger) module changes
- added: Online Logger page
- and more minor bug fixed


SL3 UNLOCK
SL3 Logger/Unlocker (sl3u.exe)
- added: support for RAP3Gv4, RAPUv2 by USB
- added: Online Logger tab
used to request unlock codes by imei+hash (.sha files)

How to unlock SL3 with HTI:
1. Register HTI to use this service
(choose your password here !)

2. Top up HTI credit to be able to use this service

3. Login using password chosen when registration

4. Upload Hash, select sha or log files

5. Wait for few minutes (As displayed on waiting time)

6. Job Status are displayed once you Upload Hash and everytime you Login
use Login button, to check or request codes for uploaded hash(if any)

7. When status is "finished", right click on individual hash and select one of menus


- Abort/Cancel Job: will cancel job and refund credit
(only available when job is "pending")
- Send Codes to the phone: Send codes directly to the phone
- Save Codes to text: Save codes to text file
- Copy Codes to clipboard: Copy codes to clipboard


NOTE for SL3 Unlock:
SL3 Unlock is in beta stage
Beta test resellers will be chosen.
This resellers can chose their beta test users.
To be a beta test user please contact your reseller.



Links to download MxBox/MxKey v3.5 rev1.6 for FREE 

Phoenix Service Software 2011.46.002.47246 Cracked

Main component versions in the release:

• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 2011.48
• Flash Update Package 2011.40.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.43.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.38.3.46817

New Products added
• RM-806, RM-813, RM-839

New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Product API
• New version of Connectivity Cable Driver

Error Corrections & changes

• Improvements to flash components, reducing the flashing time for USB Only concept devices (Genius Case#183882: Phoenix: N8 – unusual phone behaviour during flashing)

Supported operating systems and user rights

• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)